3M™ Health Care
How Supplied
| Island | 2″ × 2 3/4″ (1″ × 1 1/2″ pad) | A6203 |
| Island | 2 × 3/8″ × 4″ (1″ × 2 3/8″ pad) | A6203 |
| Island | 3 1/2″ × 4″ (1 3/4″ × 2 3/8″ pad) | A6203 |
| Island | 6″ × 6″ (4″ × 4″ pad) | A6203 |
| Island | 3 1/2″ × 6″ (1 3/4″ × 4″ pad) | A6203 |
| Island | 3 1/2″ × 8″ (1 3/4″ × 4″ pad) | A6203 |
| Island | 3 1/2″ × 10″ (1 3/4″ × 8″ pad) | A6203 |
| Island | 3 1/2″ × 13 3/4″ (1 3/4″ × 11 3/4″ pad) | A6203 |
| Oval | 3 1/2″ × 4 1/8″ (1 3/4″ × 11 3/4″ pad) | A6204 |
The 3M™ Tegaderm™ +Pad Film Dressing with Non-Adherent Pad is a sterile, waterproof, bacterial and viral* barrier dressing, which consists of a nonadherent absorbent pad bonded to a larger, thin film transparent dressing.
The 3M™ Tegaderm™ +Pad Film Dressing with Non-Adherent Pad is designed for covering superficial and partial-thickness wounds, surgical incisions and IV catheter sites. Follow your “tape and gauze” protocol for use.
This product is not designed, sold, or intended for use except as indicated.
Not for replacing sutures or other primary wound closures.
Prepare the site for wound dressing or catheter insertion according to facility policy. To ensure dressing adhesion, clip excess hair at the site, but do not shave. Allow all preparation liquids to dry completely before applying the dressing.
Peel the paper liner from the paper-framed dressing, exposing the adhesive surface. Position the framed window over the wound site or catheter insertion site; apply the dressing.
Remove the paper frame from the dressing while smoothing down the dressing edges and sealing them securely around the wound or catheter.